Step-By-Step Guide to Preparing and Painting Garden Decking

If you’re considering painting your deck, there are a few things to consider. For one, you will need to make sure that you do not have any damage to the surface. In addition, you need to be prepared to protect your eyes and skin from paint splatter.

Prepare the deck surface

Preparing and painting garden decking is not as difficult as one might think. The first step is to remove all the old paint from the surface. This will ensure that the new paint will not bubble or bleed.

You can use a power washer to get rid of dirt and debris. You should also sand down the surface to make it more smooth. This will help the paint to stick to the wood.

You can also use a paint sprayer to coat the deck. The sprayer will help you get the job done quickly. You should also buy a garden hose with a jet nozzle. You can then rinse away the cleaning solution.

If you’re worried about getting the job done right the first time, try using a protimeter. This will tell you how long to wait between applying the various layers of paint. You should also use the protimeter to measure the humidity of the wood.

Clean with a pressure washer

Pressure washers are an excellent tool for cleaning garden decking. They remove dirt and grime from your patio or deck, without damaging the surrounding vegetation. However, it is important to use caution when using these tools.

First, prepare your garden decking by removing all attachments and furniture. Next, find the right spot to set the pressure washer. Before beginning, be sure to wear protective gear, such as safety goggles and enclosed shoes.

Once you’ve found a good position, you’ll need to make sure the water is turned on. Once you’ve done this, start at the top of the section and work your way down. Move down in steps, using a sweeping motion. Keep in mind that this should be done in a way that’s safe for the wood.

Once you’ve finished with your initial sweeping, you’ll need to add a bit of cleaning solution to the pressure washer. This should include a few ounces of soap and a few ounces of oxygen bleach.

Apply exterior wood putty

When you want to keep your outdoor decking looking great, you need to apply exterior wood putty. This will help to keep the wood from rot and make it less likely to be damaged by water. It is also an ideal way to repair cracks and nail holes.

These days, there are many different types of fillers available. Some are made from latex, while others are made from polyurethane. The type you choose will depend on the size and type of project you are undertaking. Highly recommended this site Painters in Geelong

There are also various types of putties. They can be used on both indoor and outdoor woodworking projects. They are easy to use, but can vary in the ingredients they contain.

Wood putty is ideal for covering nicks, scratches and nail holes. You can also apply it as a sealing agent. It is also durable and resists moisture.

The downside to using wood putty is that it takes a long time to dry. You will need to wait for at least a day before you can start working. Besides, it can be difficult to get a smooth finish.

Protect your eyes and skin from paint splatter

If you are planning on painting your garden decking, you should protect your eyes and nose from paint splatter. The risk of a splatter getting into your eyes or lungs can be a major hazard. The good news is, you can easily protect your eyes and nose from paint splatter. Here are a few tips to help you.

First, wear protective clothing such as gloves and goggles. You’ll also want to use a dust sheet, preferably made from light-weight plastic. Ideally, you should wear one that is stamped with the word “Z87”. This is a seal from the American National Standards Institute.

Next, make sure that you have a water source available. You can either get a power washer or a garden hose with jet nozzle. Do not set the nozzle too high or too close to the wood.

After you have removed the old paint, you’ll need to strip the bare wood. It’s important to do this in sections. You’ll need to do this at least three to four boards at a time.